# Anova One shutting off with "Low Liquid" Warning **URL:** \ **Category:** Anova Support\ **Created:** [October 27, 2015, 11:28pm UTC](https://community.anovaculinary.com/t/anova-one-shutting-off-with-low-liquid-warning/614 "2015-10-27T23:28:51Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![JordanV](https://avatars.discourse-cdn.com/v4/letter/j/f475e1/32.png) [@JordanV](https://community.anovaculinary.com/u/JordanV)\ **Post date:** [October 27, 2015, 11:28pm UTC](https://community.anovaculinary.com/t/anova-one-shutting-off-with-low-liquid-warning/614/1 "2015-10-27T23:28:51Z")
I’ve only had this since July when Amazon was running a sale and it worked great the first four times I’ve used it but lately it’s been shutting off on its own with a “Low Liquid” warning. The past couple times I’ve tried to use it, this has happened within a couple minutes of starting it. However, I read that the water sensor works by detecting ions and tried it in a vinegar solution. It worked so I added vinegar to the water bath and it got up to temperature and circulated the water for a couple hours. It shut off again with the “Low Liquid” warning. When I tried to restart it, it worked but for about a minute. This time, there were some clicking noises preceding shut off. The fan was running pretty strong after shut-off so I have a feeling it is an overheating issue. Sitting in a heated vinegar solution should have descaled it thoroughly and I can’t imagine that doing any favors corrosion wise to the water level sensor. The fuse looks fine though that could be it. Apparently only the 230V units have a spare. What type of fuse should I get? Is there new firmware? Is there any way to bypass the water level logic? I’m beyond the 30-day return period for Amazon so does anyone have suggestions? Thanks! ---
**Author:** ![Bill](https://sea2.discourse-cdn.com/flex016/user_avatar/community.anovaculinary.com/bill/32/9_2.png) [@Bill](https://community.anovaculinary.com/u/Bill)\ **Post date:** [October 28, 2015, 6:29pm UTC](https://community.anovaculinary.com/t/anova-one-shutting-off-with-low-liquid-warning/614/2 "2015-10-28T18:29:05Z")
@JordanV sounds like an Anova 1 - is that the case? Either way, head over to [Returns – Anova Culinary](http://anovaculinary.com/pages/returns/) and fill out the requested info. From there our support team will help you out! 🙂 ---
**Author:** ![JordanV](https://avatars.discourse-cdn.com/v4/letter/j/f475e1/32.png) [@JordanV](https://community.anovaculinary.com/u/JordanV)\ **Post date:** [October 29, 2015, 10:08pm UTC](https://community.anovaculinary.com/t/anova-one-shutting-off-with-low-liquid-warning/614/3 "2015-10-29T22:08:47Z")
Okay, I filed the return request.  I’m hoping I can get another Anova One since that has higher reviews on Amazon and better specifications. It looks to be discontinued though.