# Anova PC

**URL:** <https://community.anovaculinary.com/t/anova-pc/34111>\
**Category:** Anova Precision® Cooker\
**Created:** [October 14, 2024, 2:39am UTC](https://community.anovaculinary.com/t/anova-pc/34111 "2024-10-14T02:39:09Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Lesliev](https://avatars.discourse-cdn.com/v4/letter/l/f19dbf/32.png) [@Lesliev](https://community.anovaculinary.com/u/Lesliev)\
**Post date:** [October 14, 2024, 2:39am UTC](https://community.anovaculinary.com/t/anova-pc/34111/1 "2024-10-14T02:39:09Z")

</div>

I have an Anova PC wifi/ Bluetooth i haven’t used for about 12 months but am now hoping to start using again. Previously it was connected to my WiFi and the app was a great asset to its use. I now however cant get it to connect again to my network and from advice here and Anova support have done the following.  
Reset the Anova at least 5 times via holding the wifi led  
Deleted and reinstalled the Anova App on my iPhone-Twice  
Held it next to my wifi router.  
After some 20 attempts i am still getting the something is wrong message.

Things I have noticed:  
The blue LED wifi light flashes during setup and will sometimes go to flashing white for a few seconds before returning to blue flashing  
When I see the correct details displayed for the model I have and select continue i am presented with a screen asking for my SSID. I would expect the unit would have searched and displayed local SSID for me to choose from but it is just blank  
I manually enter the ssid and am wondering if that process means the unit doesn’t find my SSID as it hasn’t already seen it.  
This is confirmed further as if I deliberately enter an incorrect password it doesnt advise that as incorrect. I just get “something is wrong” message.  
I cant disable the 5ghz channel but the 2.5ghz is using the correct 802.11b/g/n standard  
Hoping someone here can suggest a fix or advise what I am doing wrong.  
Cheers for any responses.  
Les

---

<div class="post-metadata">

**Author:** ![MrGus](https://avatars.discourse-cdn.com/v4/letter/m/b9bd4f/32.png) [@MrGus](https://community.anovaculinary.com/u/MrGus)\
**Post date:** [October 18, 2024, 1:18pm UTC](https://community.anovaculinary.com/t/anova-pc/34111/2 "2024-10-18T13:18:10Z")

</div>

Plenty of detail on the forum re installation.  
However you’d be best to contact anova direct for a do-over, maybe they can shed some light?