# Clamp doesn't fit

**URL:** <https://community.anovaculinary.com/t/clamp-doesnt-fit/125>\
**Category:** Anova Support\
**Created:** [November 15, 2014, 7:45pm UTC](https://community.anovaculinary.com/t/clamp-doesnt-fit/125 "2014-11-15T19:45:31Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![zollman](https://avatars.discourse-cdn.com/v4/letter/z/e79b87/32.png) [@zollman](https://community.anovaculinary.com/u/zollman)\
**Post date:** [November 15, 2014, 7:45pm UTC](https://community.anovaculinary.com/t/clamp-doesnt-fit/125/1 "2014-11-15T19:45:31Z")

</div>

I’ve tried twisting the smaller ring to loosen the clamp, but I can’t slide it over the cooker – it’s too narrow. I’ve even unscrewed the ring from the rest of the clamp. Has anyone else had this problem?

---

<div class="post-metadata">

**Author:** ![jahn89](https://avatars.discourse-cdn.com/v4/letter/j/3ab097/32.png) [@jahn89](https://community.anovaculinary.com/u/jahn89)\
**Post date:** [November 16, 2014, 12:05am UTC](https://community.anovaculinary.com/t/clamp-doesnt-fit/125/2 "2014-11-16T00:05:26Z")

</div>

Mine fits properly. Have any pictures?

If the small dial is opened the entire way if you look inside it’s a circle, when you tighten it it’s like a C with the open area pushed inward - but I think that’s what you meant by the small ring.

---

<div class="post-metadata">

**Author:** ![Stephen\_Svajian](https://sea2.discourse-cdn.com/flex016/user_avatar/community.anovaculinary.com/stephen_svajian/32/6222_2.png) [@Stephen\_Svajian](https://community.anovaculinary.com/u/Stephen_Svajian)\
**Post date:** [November 16, 2014, 10:08pm UTC](https://community.anovaculinary.com/t/clamp-doesnt-fit/125/3 "2014-11-16T22:08:09Z")

</div>

Is there any way you can share a picture?