# Constant Beeping (Low water level) on brand new unit

**URL:** <https://community.anovaculinary.com/t/constant-beeping-low-water-level-on-brand-new-unit/21946>\
**Category:** Anova Support\
**Created:** [July 9, 2019, 3:40am UTC](https://community.anovaculinary.com/t/constant-beeping-low-water-level-on-brand-new-unit/21946 "2019-07-09T03:40:03Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![jaymcmillan](https://sea2.discourse-cdn.com/flex016/user_avatar/community.anovaculinary.com/jaymcmillan/32/5489_2.png) [@jaymcmillan](https://community.anovaculinary.com/u/jaymcmillan)\
**Post date:** [July 9, 2019, 3:40am UTC](https://community.anovaculinary.com/t/constant-beeping-low-water-level-on-brand-new-unit/21946/1 "2019-07-09T03:40:03Z")

</div>

Ordered a WiFi unit last week, on first go there was the long drawn out “low water” beep. Even though it was brand new, went through all the steps to dry it, etc. Didn’t work, had a replacement unit sent out immediately.

However, the replacement unit has done the exact same thing… am I just unlucky or is there something I am missing here?

---

<div class="post-metadata">

**Author:** ![Ember](https://sea2.discourse-cdn.com/flex016/user_avatar/community.anovaculinary.com/ember/32/729_2.png) [@Ember](https://community.anovaculinary.com/u/Ember)\
**Post date:** [July 9, 2019, 9:06am UTC](https://community.anovaculinary.com/t/constant-beeping-low-water-level-on-brand-new-unit/21946/2 "2019-07-09T09:06:55Z")

</div>

I would suggest your just very unlucky.

---

<div class="post-metadata">

**Author:** ![Mike\_Jones](https://sea2.discourse-cdn.com/flex016/user_avatar/community.anovaculinary.com/mike_jones/32/5404_2.png) [@Mike\_Jones](https://community.anovaculinary.com/u/Mike_Jones)\
**Post date:** [July 14, 2019, 11:12pm UTC](https://community.anovaculinary.com/t/constant-beeping-low-water-level-on-brand-new-unit/21946/3 "2019-07-14T23:12:10Z")

</div>

I am not sure he is un-lucky. I think Anova build quality is lacking. My first two units were also broken. The first wouldn’t connect to wifi and the second wouldn’t stir or heat up water…

My third works… but yea their build quality has been awful.

---

<div class="post-metadata">

**Author:** ![jaymcmillan](https://sea2.discourse-cdn.com/flex016/user_avatar/community.anovaculinary.com/jaymcmillan/32/5489_2.png) [@jaymcmillan](https://community.anovaculinary.com/u/jaymcmillan)\
**Post date:** [July 20, 2019, 4:26am UTC](https://community.anovaculinary.com/t/constant-beeping-low-water-level-on-brand-new-unit/21946/4 "2019-07-20T04:26:48Z")

</div>

Just an update - turns out we were being sent units from a defective batch. Customer Support arranged for a third unit to be sent from a different batch and can confirm that we have a rack of ribs currently in the sous vide tub cooking away.

---

<div class="post-metadata">

**Author:** ![BobRoss](https://avatars.discourse-cdn.com/v4/letter/b/53a042/32.png) [@BobRoss](https://community.anovaculinary.com/u/BobRoss)\
**Post date:** [January 25, 2020, 8:07pm UTC](https://community.anovaculinary.com/t/constant-beeping-low-water-level-on-brand-new-unit/21946/5 "2020-01-25T20:07:23Z")

</div>

When the third one fail (it will eventually) [Here is the fix.](https://community.anovaculinary.com/t/long-beep-permanent-low-water-alarm-fix-how-to/24929)