# Dripping NANO **URL:** \ **Category:** Anova Support\ **Created:** [January 12, 2021, 7:10pm UTC](https://community.anovaculinary.com/t/dripping-nano/27935 "2021-01-12T19:10:21Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![glorifiedplumber](https://avatars.discourse-cdn.com/v4/letter/g/f19dbf/32.png) [@glorifiedplumber](https://community.anovaculinary.com/u/glorifiedplumber)\ **Post date:** [January 12, 2021, 7:10pm UTC](https://community.anovaculinary.com/t/dripping-nano/27935/1 "2021-01-12T19:10:21Z")
AN400 been working well but started to drip. See the picture. The clamp is otherwise bone dry, so the leak is coming from inside it. It’s not comforting to see water coming from inside an electrical device. Has anyone seen this? Is it fixable? ![drip](https://us1.discourse-cdn.com/flex016/uploads/anova/original/2X/9/9eddf6c104e550540a3da040ed695721f270b66d.jpeg) ---
**Author:** ![john.jcb](https://sea2.discourse-cdn.com/flex016/user_avatar/community.anovaculinary.com/john.jcb/32/7269_2.png) [@john.jcb](https://community.anovaculinary.com/u/john.jcb)\ **Post date:** [January 13, 2021, 4:03pm UTC](https://community.anovaculinary.com/t/dripping-nano/27935/2 "2021-01-13T16:03:01Z")
Try a different container. I do not see how water can get to the clamp like the picture shows. ---
**Author:** ![Sousdave](https://avatars.discourse-cdn.com/v4/letter/s/e274bd/32.png) [@Sousdave](https://community.anovaculinary.com/u/Sousdave)\ **Post date:** [July 3, 2021, 11:36pm UTC](https://community.anovaculinary.com/t/dripping-nano/27935/4 "2021-07-03T23:36:51Z")
I picked up a nano at Target this morning. Working great and holding temperature nicely for 2 hours. Now I have the same problem as you. There is a slow drip coming from the same place as in your photo. The water appear to be coming from the plastic seam in the bottom of the clamp, below the screw. I just can’t imagine a design that permits water ingress into the clamp. The water level in the pot is about 1 inch below the MAX line. Back to Target we go for an exchange! ---
**Author:** ![chatnoir](https://avatars.discourse-cdn.com/v4/letter/c/ecd19e/32.png) [@chatnoir](https://community.anovaculinary.com/u/chatnoir)\ **Post date:** [July 4, 2021, 8:07pm UTC](https://community.anovaculinary.com/t/dripping-nano/27935/5 "2021-07-04T20:07:19Z")
Sousdave, you might want to ask about the drip problem at [support@anovaculinary.com](mailto:support@anovaculinary.com). They are the corporate problems solvers. We are only customers at this forum. ---
**Author:** ![mbaileybend](https://sea2.discourse-cdn.com/flex016/user_avatar/community.anovaculinary.com/mbaileybend/32/7671_2.png) [@mbaileybend](https://community.anovaculinary.com/u/mbaileybend)\ **Post date:** [July 14, 2021, 3:49pm UTC](https://community.anovaculinary.com/t/dripping-nano/27935/6 "2021-07-14T15:49:58Z")
Happened to me. Not fixable needs to be replaced. ---
**Author:** ![tspil](https://avatars.discourse-cdn.com/v4/letter/t/4491bb/32.png) [@tspil](https://community.anovaculinary.com/u/tspil)\ **Post date:** [April 28, 2022, 3:47pm UTC](https://community.anovaculinary.com/t/dripping-nano/27935/7 "2022-04-28T15:47:52Z")
Same issue here, Anova replaced the first one but the replacement has the same issue out of the box ---
**Author:** ![Mdiz0147](https://avatars.discourse-cdn.com/v4/letter/m/f07891/32.png) [@Mdiz0147](https://community.anovaculinary.com/u/Mdiz0147)\ **Post date:** [December 6, 2022, 11:30pm UTC](https://community.anovaculinary.com/t/dripping-nano/27935/8 "2022-12-06T23:30:01Z")
Mine just got delivered and it’s doing the same thing in the first use. Seems like a common flaw?