# Firmware 1.4.17 does not load

**URL:** <https://community.anovaculinary.com/t/firmware-1-4-17-does-not-load/30909>\
**Category:** Anova Precision® Oven\
**Created:** [July 26, 2022, 8:15am UTC](https://community.anovaculinary.com/t/firmware-1-4-17-does-not-load/30909 "2022-07-26T08:15:01Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Tony1](https://avatars.discourse-cdn.com/v4/letter/t/858c86/32.png) [@Tony1](https://community.anovaculinary.com/u/Tony1)\
**Post date:** [July 26, 2022, 8:15am UTC](https://community.anovaculinary.com/t/firmware-1-4-17-does-not-load/30909/1 "2022-07-26T08:15:01Z")

</div>

Used the update link on the Anova Oven app to update firmware from 1.2.10 to 1.4.17 but the update bombs out after a couple of seconds. My Son also has tried with his unit (he lives in another state) with exactly the same results. Looks like the upload has not been beta tested again.

---

<div class="post-metadata">

**Author:** ![Douglas](https://sea2.discourse-cdn.com/flex016/user_avatar/community.anovaculinary.com/douglas/32/7533_2.png) [@Douglas](https://community.anovaculinary.com/u/Douglas)\
**Post date:** [July 26, 2022, 12:35pm UTC](https://community.anovaculinary.com/t/firmware-1-4-17-does-not-load/30909/2 "2022-07-26T12:35:07Z")

</div>

My experience with updating firmware (particularly not ANOVA!) is that they must be carefully done in sequence, as often a new version depends on aspects of the next previous version.

---

<div class="post-metadata">

**Author:** ![RobY](https://avatars.discourse-cdn.com/v4/letter/r/f1d935/32.png) [@RobY](https://community.anovaculinary.com/u/RobY)\
**Post date:** [August 1, 2022, 12:03am UTC](https://community.anovaculinary.com/t/firmware-1-4-17-does-not-load/30909/3 "2022-08-01T00:03:34Z")

</div>

I had the same issue however it was able to update seamlessly 2 days ago. Perhaps a problem on the Anova FTP server. So far so good post update. Update took a minute or so.

---

<div class="post-metadata">

**Author:** ![Tony1](https://avatars.discourse-cdn.com/v4/letter/t/858c86/32.png) [@Tony1](https://community.anovaculinary.com/u/Tony1)\
**Post date:** [August 1, 2022, 5:52am UTC](https://community.anovaculinary.com/t/firmware-1-4-17-does-not-load/30909/4 "2022-08-01T05:52:28Z")

</div>

Yeh all good now. Must have been a failure to connect to the server as you suggested. Problem solved.

---

<div class="post-metadata">

**Author:** ![DMG](https://avatars.discourse-cdn.com/v4/letter/d/5e9695/32.png) [@DMG](https://community.anovaculinary.com/u/DMG)\
**Post date:** [August 1, 2022, 3:07pm UTC](https://community.anovaculinary.com/t/firmware-1-4-17-does-not-load/30909/5 "2022-08-01T15:07:34Z")

</div>

I just got 1.4.17 too. Is there a changelog anywhere? What’s different?

---

<div class="post-metadata">

**Author:** ![Teejayz](https://sea2.discourse-cdn.com/flex016/user_avatar/community.anovaculinary.com/teejayz/32/7701_2.png) [@Teejayz](https://community.anovaculinary.com/u/Teejayz)\
**Post date:** [August 3, 2022, 5:16pm UTC](https://community.anovaculinary.com/t/firmware-1-4-17-does-not-load/30909/6 "2022-08-03T17:16:12Z")

</div>

Nothing fun unfortunately

> **[Oven Firmware Changelog](https://support.anovaculinary.com/hc/en-us/articles/360058146272-Oven-Firmware-Changelog)**
>
> 1.4.24
> 
> Fixes in this release:
> 
> Reduction in periods of peak power draw that might cause some heavily loaded circuits to trip.
> 
> Notes: If you encounter an error while attempting to update through t...