# Hose Clamp **URL:** \ **Category:** Anova Support\ **Created:** [October 28, 2017, 5:28am UTC](https://community.anovaculinary.com/t/hose-clamp/9970 "2017-10-28T05:28:07Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![stephan28](https://avatars.discourse-cdn.com/v4/letter/s/46a35a/32.png) [@stephan28](https://community.anovaculinary.com/u/stephan28)\ **Post date:** [October 28, 2017, 5:28am UTC](https://community.anovaculinary.com/t/hose-clamp/9970/1 "2017-10-28T05:28:07Z")
I just received my Anova Sous Vide WiFi model that I ordered directly from Anova. I paired it with my phone and my router so all is good there. I did have to uninstall and reinstall the app for it to pair with my router. I ran a quick test run to test the unit out and it seemed to work great. After I dried it off I removed the stainless housing to look at the impeller and the heating coils. To my surprise I found an metal hose clamp securing a sense line and the heater line together. I found this a little odd but I wanted to run it by you folks to see what you think. Is this normal? Thank you! ---
**Author:** ![Brian1](https://avatars.discourse-cdn.com/v4/letter/b/50afbb/32.png) [@Brian1](https://community.anovaculinary.com/u/Brian1)\ **Post date:** [October 28, 2017, 1:47pm UTC](https://community.anovaculinary.com/t/hose-clamp/9970/2 "2017-10-28T13:47:21Z")
That’s how they construct them. Yes, it’s “normal”. ---
**Author:** ![stephan28](https://avatars.discourse-cdn.com/v4/letter/s/46a35a/32.png) [@stephan28](https://community.anovaculinary.com/u/stephan28)\ **Post date:** [October 28, 2017, 5:44pm UTC](https://community.anovaculinary.com/t/hose-clamp/9970/3 "2017-10-28T17:44:24Z")
Thank you! I figured as much but I wanted to double check.