# Installing as built-in **URL:** \ **Category:** Anova Precision® Oven\ **Created:** [September 6, 2021, 2:19pm UTC](https://community.anovaculinary.com/t/installing-as-built-in/29261 "2021-09-06T14:19:19Z")\ **Posts on this page:** 5\ **Page:** 2
**Author:** ![gaspard](https://avatars.discourse-cdn.com/v4/letter/g/ee7513/32.png) [@gaspard](https://community.anovaculinary.com/u/gaspard)\ **Post date:** [September 29, 2022, 7:48am UTC](https://community.anovaculinary.com/t/installing-as-built-in/29261/21 "2022-09-29T07:48:41Z")
No issues so far. But I divert the steam with a flexible tube away from the oven. ---
**Author:** ![K\_C](https://avatars.discourse-cdn.com/v4/letter/k/d6d6ee/32.png) [@K\_C](https://community.anovaculinary.com/u/K_C)\ **Post date:** [September 30, 2022, 1:10am UTC](https://community.anovaculinary.com/t/installing-as-built-in/29261/22 "2022-09-30T01:10:03Z")
Can i trouble you to show the tube you mentioned? How is it done? Thank you. ---
**Author:** ![kapside](https://avatars.discourse-cdn.com/v4/letter/k/e56c9b/32.png) [@kapside](https://community.anovaculinary.com/u/kapside)\ **Post date:** [November 16, 2023, 8:46am UTC](https://community.anovaculinary.com/t/installing-as-built-in/29261/23 "2023-11-16T08:46:28Z")
Hey, could you please share a photo of the flexible tube and how it’s attached to the oven? I wanted to try something similar, also to troubleshoot the “random shut off” problem some people are experiencing… Also does anyone know where exactly the heat dissipates around the oven? I was also considering a fan to help the cooling system… Thank you!! ---
**Author:** ![gaspard](https://avatars.discourse-cdn.com/v4/letter/g/ee7513/32.png) [@gaspard](https://community.anovaculinary.com/u/gaspard)\ **Post date:** [November 16, 2023, 9:14am UTC](https://community.anovaculinary.com/t/installing-as-built-in/29261/24 "2023-11-16T09:14:20Z")
It is a bit difficult to photograph. But what I did is very simple. I attached a 15mm copper hook (90 degrees) to the oven; this fits exactly. The tube (suitable for higher temperatures) was then attached to this hook. Works very well. ---
**Author:** ![ira](https://sea2.discourse-cdn.com/flex016/user_avatar/community.anovaculinary.com/ira/32/8023_2.png) [@ira](https://community.anovaculinary.com/u/ira)\ **Post date:** [November 16, 2023, 5:41pm UTC](https://community.anovaculinary.com/t/installing-as-built-in/29261/25 "2023-11-16T17:41:16Z")
The top certainly gets warm, I’ve not felt the back of left side, but the right side is safe as it’s where the water tank is. If I was going to put it in a cabinet, I’d add a fan so that the air in the cabinet stays cool while the oven is on. [Previous page](https://community.anovaculinary.com/t/installing-as-built-in/29261.md?page=1)