# Nano cooker **URL:** \ **Category:** General\ **Created:** [October 6, 2018, 10:20pm UTC](https://community.anovaculinary.com/t/nano-cooker/16980 "2018-10-06T22:20:35Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![Travis\_Aslin](https://sea2.discourse-cdn.com/flex016/user_avatar/community.anovaculinary.com/travis_aslin/32/3324_2.png) [@Travis\_Aslin](https://community.anovaculinary.com/u/Travis_Aslin)\ **Post date:** [October 6, 2018, 10:20pm UTC](https://community.anovaculinary.com/t/nano-cooker/16980/1 "2018-10-06T22:20:35Z")
I modified a Coleman small stacker to work with my Nano. It isn’t perfect yet but still a work in progress ---
**Author:** ![AlyssaWOAH](https://sea2.discourse-cdn.com/flex016/user_avatar/community.anovaculinary.com/alyssawoah/32/2946_2.png) [@AlyssaWOAH](https://community.anovaculinary.com/u/AlyssaWOAH)\ **Post date:** [October 9, 2018, 1:00pm UTC](https://community.anovaculinary.com/t/nano-cooker/16980/2 "2018-10-09T13:00:40Z")
Nice. Have pics of the progress so far? ---
**Author:** ![Bencurto](https://avatars.discourse-cdn.com/v4/letter/b/ac91a4/32.png) [@Bencurto](https://community.anovaculinary.com/u/Bencurto)\ **Post date:** [October 14, 2018, 3:26pm UTC](https://community.anovaculinary.com/t/nano-cooker/16980/3 "2018-10-14T15:26:44Z")
Yeah, some of the pictures would be nice. Thanks! ---
**Author:** ![cwmagui](https://sea2.discourse-cdn.com/flex016/user_avatar/community.anovaculinary.com/cwmagui/32/3748_2.png) [@cwmagui](https://community.anovaculinary.com/u/cwmagui)\ **Post date:** [October 18, 2018, 11:19am UTC](https://community.anovaculinary.com/t/nano-cooker/16980/4 "2018-10-18T11:19:34Z")
By “isn’t perfect yet”, if you’re talking about the Anova resting on the bottom of the cooler, I have a fix. I cut a square block off of a 2x4. Then I drilled a hole in the center and use it to raise the Anova off of the bottom. The 2x4 is the perfect thickness.