# Oven Firmware Changelog

**URL:** <https://community.anovaculinary.com/t/oven-firmware-changelog/29199>\
**Category:** Anova Precision® Oven\
**Created:** [August 20, 2021, 4:37am UTC](https://community.anovaculinary.com/t/oven-firmware-changelog/29199 "2021-08-20T04:37:13Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![mbaileybend](https://sea2.discourse-cdn.com/flex016/user_avatar/community.anovaculinary.com/mbaileybend/32/7671_2.png) [@mbaileybend](https://community.anovaculinary.com/u/mbaileybend)\
**Post date:** [August 20, 2021, 4:37am UTC](https://community.anovaculinary.com/t/oven-firmware-changelog/29199/1 "2021-08-20T04:37:13Z")

</div>

Why does it take so long for Anova to post the firmware change? This should be done at the same time as the change is taking place so we can see what is going on. 1.1.32 has yet to be posted. If this were posted at the time of the update it might save a lot of frustration or questions.  
Mike

---

<div class="post-metadata">

**Author:** ![anovaculinary](https://sea2.discourse-cdn.com/flex016/user_avatar/community.anovaculinary.com/anovaculinary/32/7315_2.png) [@anovaculinary](https://community.anovaculinary.com/u/anovaculinary)\
**Post date:** [August 20, 2021, 2:31pm UTC](https://community.anovaculinary.com/t/oven-firmware-changelog/29199/2 "2021-08-20T14:31:04Z")

</div>

Hey Mike! Totally understand, we normally try and share the release notes on launch. We’ll get that shared today!

---

<div class="post-metadata">

**Author:** ![palo](https://avatars.discourse-cdn.com/v4/letter/p/858c86/32.png) [@palo](https://community.anovaculinary.com/u/palo)\
**Post date:** [August 20, 2021, 3:52pm UTC](https://community.anovaculinary.com/t/oven-firmware-changelog/29199/3 "2021-08-20T15:52:50Z")

</div>

Where can the release notes be found?

p

---

<div class="post-metadata">

**Author:** ![anovaculinary](https://sea2.discourse-cdn.com/flex016/user_avatar/community.anovaculinary.com/anovaculinary/32/7315_2.png) [@anovaculinary](https://community.anovaculinary.com/u/anovaculinary)\
**Post date:** [August 20, 2021, 3:55pm UTC](https://community.anovaculinary.com/t/oven-firmware-changelog/29199/4 "2021-08-20T15:55:34Z")

</div>

1.1.32 This release changes a single line of code to fix the error that caused ovens to start rebooting late Monday

---

<div class="post-metadata">

**Author:** ![palo](https://avatars.discourse-cdn.com/v4/letter/p/858c86/32.png) [@palo](https://community.anovaculinary.com/u/palo)\
**Post date:** [August 20, 2021, 6:22pm UTC](https://community.anovaculinary.com/t/oven-firmware-changelog/29199/5 "2021-08-20T18:22:41Z")

</div>

Where can previous release notes be found?

p

---

<div class="post-metadata">

**Author:** ![mbaileybend](https://sea2.discourse-cdn.com/flex016/user_avatar/community.anovaculinary.com/mbaileybend/32/7671_2.png) [@mbaileybend](https://community.anovaculinary.com/u/mbaileybend)\
**Post date:** [August 20, 2021, 8:57pm UTC](https://community.anovaculinary.com/t/oven-firmware-changelog/29199/6 "2021-08-20T20:57:01Z")

</div>

[Oven Firmware Changelog – Anova Support | Anova Culinary (US)]

> **[Oven Firmware Changelog](https://support.anovaculinary.com/hc/en-us/articles/360058146272-Oven-Firmware-Changelog)**
>
> 1.4.24
> 
> Fixes in this release:
> 
> Reduction in periods of peak power draw that might cause some heavily loaded circuits to trip.
> 
> Notes: If you encounter an error while attempting to update through t...

---

<div class="post-metadata">

**Author:** ![mbaileybend](https://sea2.discourse-cdn.com/flex016/user_avatar/community.anovaculinary.com/mbaileybend/32/7671_2.png) [@mbaileybend](https://community.anovaculinary.com/u/mbaileybend)\
**Post date:** [September 22, 2021, 3:27am UTC](https://community.anovaculinary.com/t/oven-firmware-changelog/29199/7 "2021-09-22T03:27:18Z")

</div>

[Oven Firmware Changelog – Anova Support | Anova Culinary (US)]

> **[Oven Firmware Changelog](https://support.anovaculinary.com/hc/en-us/articles/360058146272-Oven-Firmware-Changelog)**
>
> 1.4.24
> 
> Fixes in this release:
> 
> Reduction in periods of peak power draw that might cause some heavily loaded circuits to trip.
> 
> Notes: If you encounter an error while attempting to update through t...