# Oven tripping fuses

**URL:** <https://community.anovaculinary.com/t/oven-tripping-fuses/32462>\
**Category:** Anova Precision® Oven\
**Created:** [October 31, 2023, 11:05am UTC](https://community.anovaculinary.com/t/oven-tripping-fuses/32462 "2023-10-31T11:05:42Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![soropeza](https://avatars.discourse-cdn.com/v4/letter/s/839c29/32.png) [@soropeza](https://community.anovaculinary.com/u/soropeza)\
**Post date:** [October 31, 2023, 11:05am UTC](https://community.anovaculinary.com/t/oven-tripping-fuses/32462/1 "2023-10-31T11:05:42Z")

</div>

I have had the oven for 10 months and everything was working perfectly until last week… whenever I connect the oven the fuse board trips. It has been connected in the same board since I´ve had it. If I move it to a different plug on a different board, the same happens. I am located in Spain and dont know what to do. Thanks.

---

<div class="post-metadata">

**Author:** ![MrGus](https://avatars.discourse-cdn.com/v4/letter/m/b9bd4f/32.png) [@MrGus](https://community.anovaculinary.com/u/MrGus)\
**Post date:** [October 31, 2023, 11:20am UTC](https://community.anovaculinary.com/t/oven-tripping-fuses/32462/2 "2023-10-31T11:20:00Z")

</div>

Thankfully you have tried it elsewhere to see if it is an individual socket fault, however I would encourage you to locate your RCD? fuse board, determine that it is not a specific room circuit at fault (likely not) but is the first thing I’d do before using the contact / chat box for anova (as these boards are not monitored by staff)

So, whilst it is cumbersome to lift, do it & hook it up to another room circuit & see if that makes a difference as to its operation or carries on tripping out… that way you have covered all reasonable bases before asking for a warranty return & replace of your unit.