# Oven went dead - and remains dead

**URL:** <https://community.anovaculinary.com/t/oven-went-dead-and-remains-dead/35388>\
**Category:** Anova Precision® Oven\
**Created:** [January 17, 2026, 12:53pm UTC](https://community.anovaculinary.com/t/oven-went-dead-and-remains-dead/35388 "2026-01-17T12:53:57Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![btrenkel](https://sea2.discourse-cdn.com/flex016/user_avatar/community.anovaculinary.com/btrenkel/32/8246_2.png) [@btrenkel](https://community.anovaculinary.com/u/btrenkel)\
**Post date:** [January 17, 2026, 12:53pm UTC](https://community.anovaculinary.com/t/oven-went-dead-and-remains-dead/35388/1 "2026-01-17T12:53:57Z")

</div>

Hi - I’m a heavy user of my Anova 2.0. Went through all the troubles with the firmware. But since then have been using the oven on a daily basis. And really enjoyed it.

Made some morning bread - finished baking - oven was switched off. Came back after 2 hours. And the oven display was dark. Unplugged, plugged in again. Checked the fuse, checked the circuit breaker. All is good.

But when I try to turn on the oven - you can hear a small hissing sound and then a subtle ‘dud’. Display remains dead. I’ve recorded the sound.

Trying to figure out how to link it here - so I put it on my Dropbox. [Anova sound when turning on](https://www.dropbox.com/scl/fi/rh1fxzvwnmows7scdb3o9/Anova-oven.-Power-on..m4a?rlkey=eurv5qpgr3qc3obq1txj1douf&dl=0)

Also asked the technicians from our apartment complex. They think the PCB is broken.

Your thoughts?