# Precision oven died in the middle of break-in cycle

**URL:** <https://community.anovaculinary.com/t/precision-oven-died-in-the-middle-of-break-in-cycle/27054>\
**Category:** First Cook Essentials\
**Created:** [October 19, 2020, 10:25pm UTC](https://community.anovaculinary.com/t/precision-oven-died-in-the-middle-of-break-in-cycle/27054 "2020-10-19T22:25:19Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![godplaysdice](https://avatars.discourse-cdn.com/v4/letter/g/d2c977/32.png) [@godplaysdice](https://community.anovaculinary.com/u/godplaysdice)\
**Post date:** [October 19, 2020, 10:25pm UTC](https://community.anovaculinary.com/t/precision-oven-died-in-the-middle-of-break-in-cycle/27054/1 "2020-10-19T22:25:19Z")

</div>

I unboxed my oven on Thursday, plugged it in, and set the rear heating element to the recommended time and temperature for the first stage of the break-in cycle. I walked away for a few minutes and when I came back, the oven was completely powered off, and it would not come back on after unplugging/replugging it in or moving outlets. There were no breakers tripped, the GFCI was not tripped, and I verified that my toaster still works in the same outlet if I move it there.

I’ve already been given a return label, but of course they won’t be able to ship a replacement until the end of October, so I figured I might as well post here and see if anyone had any additional troubleshooting tips or tricks in the meantime?

---

<div class="post-metadata">

**Author:** ![jumpjump](https://avatars.discourse-cdn.com/v4/letter/j/54ee81/32.png) [@jumpjump](https://community.anovaculinary.com/u/jumpjump)\
**Post date:** [October 19, 2020, 10:39pm UTC](https://community.anovaculinary.com/t/precision-oven-died-in-the-middle-of-break-in-cycle/27054/2 "2020-10-19T22:39:24Z")

</div>

I saw that one person was able to start the oven again after some time had passed. That said I personally wouldn’t trust an appliance that is shutting off.