# Precision Pro
**URL:** https://community.anovaculinary.com/t/precision-pro/31747
**Category:** Anova Precision® Cooker
**Created:** [February 9, 2023, 12:55am UTC](https://community.anovaculinary.com/t/precision-pro/31747 "2023-02-09T00:55:16Z")
**Posts on this page:** 8
**Page:** 1
### Author:  [@nick1013c](https://community.anovaculinary.com/u/nick1013c)
#### Post date: [February 9, 2023, 12:55am UTC](https://community.anovaculinary.com/t/precision-pro/31747/1 "2023-02-09T00:55:16Z")
Noticed that when I set the timer the past couple of times. It automatically increases on its own. I’ve stood in front of it and seen it increment by one minute at a time. So I have to set a separate timer to keep track of the time now.
---
### Author:  [@Ragnhild](https://community.anovaculinary.com/u/Ragnhild)
#### Post date: [February 9, 2023, 4:27am UTC](https://community.anovaculinary.com/t/precision-pro/31747/2 "2023-02-09T04:27:46Z")
Or you could contact customer support, if it’s under warranty they will replace it.
---
### Author:  [@MrGus](https://community.anovaculinary.com/u/MrGus)
#### Post date: [February 13, 2023, 10:17am UTC](https://community.anovaculinary.com/t/precision-pro/31747/3 "2023-02-13T10:17:16Z")
One minute over a whole cook, or continual creeping time? (in 1 minute, occasional increments)
If one minute only, & it stays as such not really a food ruining flaw, but yes, i’d prefer to see it addressed or at least see if a re-boot under anova guidance could fix it.
(If only fixing our faulty from new tesla 3 was as easy) 🤢
---
### Author:  [@nick1013c](https://community.anovaculinary.com/u/nick1013c)
#### Post date: [February 13, 2023, 12:33pm UTC](https://community.anovaculinary.com/t/precision-pro/31747/4 "2023-02-13T12:33:55Z")
It’s continuous
---
### Author:  [@MrGus](https://community.anovaculinary.com/u/MrGus)
#### Post date: [February 13, 2023, 12:50pm UTC](https://community.anovaculinary.com/t/precision-pro/31747/5 "2023-02-13T12:50:34Z")
“Bugger”
Out of warranty?
---
### Author:  [@nick1013c](https://community.anovaculinary.com/u/nick1013c)
#### Post date: [February 13, 2023, 2:39pm UTC](https://community.anovaculinary.com/t/precision-pro/31747/6 "2023-02-13T14:39:00Z")
Not sure when over 6 months since I’ve had it. Gonna send in proof today.
---
### Author:  [@MrGus](https://community.anovaculinary.com/u/MrGus)
#### Post date: [February 13, 2023, 3:07pm UTC](https://community.anovaculinary.com/t/precision-pro/31747/7 "2023-02-13T15:07:10Z")
cool, bottom of the page for contacts, or simply peruse my last handful of posts which one has a copy / paste of cs inc phone & email links.
Odd fault, would be interested to hear what anova say went wrong.
---
### Author:  [@kdlanejr79](https://community.anovaculinary.com/u/kdlanejr79)
#### Post date: [February 22, 2023, 7:52pm UTC](https://community.anovaculinary.com/t/precision-pro/31747/8 "2023-02-22T19:52:55Z")
Try resetting your unit or updating firmware.