# Precision Vacuum Chamber Error **URL:** \ **Category:** General\ **Created:** [May 13, 2022, 2:21pm UTC](https://community.anovaculinary.com/t/precision-vacuum-chamber-error/30659 "2022-05-13T14:21:45Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![AgileMJOLNIR](https://avatars.discourse-cdn.com/v4/letter/a/e9bcb4/32.png) [@AgileMJOLNIR](https://community.anovaculinary.com/u/AgileMJOLNIR)\ **Post date:** [May 13, 2022, 2:21pm UTC](https://community.anovaculinary.com/t/precision-vacuum-chamber-error/30659/1 "2022-05-13T14:21:45Z")
Got my Vacuum chamber a couple weeks again and used it about 7 or 8 times and it’s been great. Last night I used it to vacuum something and immediately after I tried using it again and now it throws an “E1” error code and won’t complete the vacuum process. Anyone have this issue or know what that code represents? Thanks ---
**Author:** ![john.jcb](https://sea2.discourse-cdn.com/flex016/user_avatar/community.anovaculinary.com/john.jcb/32/7269_2.png) [@john.jcb](https://community.anovaculinary.com/u/john.jcb)\ **Post date:** [May 13, 2022, 6:30pm UTC](https://community.anovaculinary.com/t/precision-vacuum-chamber-error/30659/2 "2022-05-13T18:30:57Z")
I cannot find any error code information. Please contact customer support. ---
**Author:** ![escotta](https://avatars.discourse-cdn.com/v4/letter/e/9dc877/32.png) [@escotta](https://community.anovaculinary.com/u/escotta)\ **Post date:** [June 27, 2022, 6:39pm UTC](https://community.anovaculinary.com/t/precision-vacuum-chamber-error/30659/3 "2022-06-27T18:39:18Z")
I also got an E1 message, but only after getting a flashing dashboard and an 8.8 displayed in the status window. After a ticking sound, it seems to have reset itself ok and is usable again. I don’t know what happened, but it may have sucked some liquid into the vacuum nozzle - which spit something onto the glass window when releasing the vacuum. ---
**Author:** ![AgileMJOLNIR](https://avatars.discourse-cdn.com/v4/letter/a/e9bcb4/32.png) [@AgileMJOLNIR](https://community.anovaculinary.com/u/AgileMJOLNIR)\ **Post date:** [June 27, 2022, 7:21pm UTC](https://community.anovaculinary.com/t/precision-vacuum-chamber-error/30659/4 "2022-06-27T19:21:39Z")
I suspect it has something to do with the units not being able to pull a vacuum. The Black seal between the lid and chamber looked to be warped on mine. Anova sent me a new unit and I noticed the seal was much more form fitting with no wrinkles or waves in it. Either way my new one has been good so far and I hope it holds. ---
**Author:** ![Jon604](https://avatars.discourse-cdn.com/v4/letter/j/a5b964/32.png) [@Jon604](https://community.anovaculinary.com/u/Jon604)\ **Post date:** [December 4, 2022, 10:40pm UTC](https://community.anovaculinary.com/t/precision-vacuum-chamber-error/30659/5 "2022-12-04T22:40:23Z")
Same here. Was fine for a week and yesterday the heat pins popped up after a seal job. It went back down after completing another job. Now i get e1 errors ever few jobs. I assume they will exchange my machine? ---
**Author:** ![FedUpInTX](https://avatars.discourse-cdn.com/v4/letter/f/e8c25b/32.png) [@FedUpInTX](https://community.anovaculinary.com/u/FedUpInTX)\ **Post date:** [November 1, 2024, 1:09am UTC](https://community.anovaculinary.com/t/precision-vacuum-chamber-error/30659/6 "2024-11-01T01:09:07Z")
I see this is an old thread, but has no solution posted. I had this happen on mine, sealed one bag, then the next one wouldn’t seal, just clicked and popped up the lid and gave me the E1 error code. I found that the sealer strip in the lid had shifted over, which I assume meant it was leaking on the other side and couldn’t seal to pull a vacuum. I recentered the rubber strip and it solved the problem. ---
**Author:** ![benstokes](https://sea2.discourse-cdn.com/flex016/user_avatar/community.anovaculinary.com/benstokes/32/8103_2.png) [@benstokes](https://community.anovaculinary.com/u/benstokes)\ **Post date:** [November 3, 2024, 7:25am UTC](https://community.anovaculinary.com/t/precision-vacuum-chamber-error/30659/7 "2024-11-03T07:25:13Z")
Yeah you talk right. I think its work[.](https://surahyaseen-pdf.com/)