# Probe Temp does not update on handle

**URL:** <https://community.anovaculinary.com/t/probe-temp-does-not-update-on-handle/32415>\
**Category:** Anova Precision® Oven\
**Created:** [October 10, 2023, 12:50pm UTC](https://community.anovaculinary.com/t/probe-temp-does-not-update-on-handle/32415 "2023-10-10T12:50:20Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![JoeInOttawa](https://avatars.discourse-cdn.com/v4/letter/j/47e85d/32.png) [@JoeInOttawa](https://community.anovaculinary.com/u/JoeInOttawa)\
**Post date:** [October 10, 2023, 12:50pm UTC](https://community.anovaculinary.com/t/probe-temp-does-not-update-on-handle/32415/1 "2023-10-10T12:50:20Z")

</div>

@anovaculinary Did you guys push a new firmware update? The temp is updating properly on my app, and if I tap the probe temp on the handle (as if I was going to change the target) it updates there, butt it only updates once and then stays static.

Any thoughts?

---

<div class="post-metadata">

**Author:** ![MrGus](https://avatars.discourse-cdn.com/v4/letter/m/b9bd4f/32.png) [@MrGus](https://community.anovaculinary.com/u/MrGus)\
**Post date:** [October 10, 2023, 4:51pm UTC](https://community.anovaculinary.com/t/probe-temp-does-not-update-on-handle/32415/2 "2023-10-10T16:51:37Z")

</div>

Joe, buddy, these boards are sadly not regularly checked in on by anova (not so that you’d know)  
In order not to delay getting the info you need, scroll down & hit the contact button / use the chat box (likely to your right with an orange circle)

Let us know what the problem / resolution is regardless (for those coming in with the same queries at any given point)

Cheers.  
Gus