# Steady Alarm **URL:** \ **Category:** Anova Support\ **Created:** [December 3, 2018, 10:31pm UTC](https://community.anovaculinary.com/t/steady-alarm/18074 "2018-12-03T22:31:48Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![mpidcarter](https://sea2.discourse-cdn.com/flex016/user_avatar/community.anovaculinary.com/mpidcarter/32/4417_2.png) [@mpidcarter](https://community.anovaculinary.com/u/mpidcarter)\ **Post date:** [December 3, 2018, 10:31pm UTC](https://community.anovaculinary.com/t/steady-alarm/18074/1 "2018-12-03T22:31:48Z")
I have a new precision cooker, i’ve used it 3 times prior to today without incident. when i started the unit today, i set the temperature at 127 and it ran for about 3 minutes, then the water stopped circulating and a steady alarm sounded. I thought i may have had it too close to the corner of the cooler i use it in, so i repositioned it, to no avail. i unplugged the unit and let it sit for 3 minutes, still the same result. what’s happening? the water level is more than adequate. ---
**Author:** ![AlyssaWOAH](https://sea2.discourse-cdn.com/flex016/user_avatar/community.anovaculinary.com/alyssawoah/32/2946_2.png) [@AlyssaWOAH](https://community.anovaculinary.com/u/AlyssaWOAH)\ **Post date:** [December 3, 2018, 11:15pm UTC](https://community.anovaculinary.com/t/steady-alarm/18074/2 "2018-12-03T23:15:10Z")
The cooker does give off a notification or beeping sound when its trying to tell us something. Maybe one of the reasons would be listed in [this support article](https://support.anovaculinary.com/hc/en-us/articles/204567894-Why-is-my-cooker-beeping-). If the suggested troubleshooting steps do not work, I’d definitely recommend reaching out to customer support at [support@anovaculinary.com](mailto:support@anovaculinary.com) so we can take a closer look at the issue. ---
**Author:** ![Jsvisockis](https://sea2.discourse-cdn.com/flex016/user_avatar/community.anovaculinary.com/jsvisockis/32/4458_2.png) [@Jsvisockis](https://community.anovaculinary.com/u/Jsvisockis)\ **Post date:** [December 4, 2018, 8:20pm UTC](https://community.anovaculinary.com/t/steady-alarm/18074/3 "2018-12-04T20:20:05Z")
I am having the same issue except mine is brand new and never used yet. Set it all up, water level is perfect in between the 2 lines. Nothing but a long beep no matter what I do. ---
**Author:** ![BobRoss](https://avatars.discourse-cdn.com/v4/letter/b/53a042/32.png) [@BobRoss](https://community.anovaculinary.com/u/BobRoss)\ **Post date:** [January 25, 2020, 8:00pm UTC](https://community.anovaculinary.com/t/steady-alarm/18074/4 "2020-01-25T20:00:43Z")
[Fix is here](https://community.anovaculinary.com/t/long-beep-permanent-low-water-alarm-fix-how-to/24929)