# Steam from the bottom of the water tank instead of the oven

**URL:** https://community.anovaculinary.com/t/steam-from-the-bottom-of-the-water-tank-instead-of-the-oven/31140
**Category:** Anova Precision® Oven
**Created:** [September 27, 2022, 10:27pm UTC](https://community.anovaculinary.com/t/steam-from-the-bottom-of-the-water-tank-instead-of-the-oven/31140 "2022-09-27T22:27:55Z")
**Posts on this page:** 5
**Page:** 1

<div class="post-metadata">

### Author: ![FlyingPig](https://avatars.discourse-cdn.com/v4/letter/f/ed8c4c/32.png) [@FlyingPig](https://community.anovaculinary.com/u/FlyingPig)
#### Post date: [September 27, 2022, 10:27pm UTC](https://community.anovaculinary.com/t/steam-from-the-bottom-of-the-water-tank-instead-of-the-oven/31140/1 "2022-09-27T22:27:55Z")

</div>

Hi, I’m using the oven for the very first time.  
I’m kinda following instruction to heat up the oven, I guess for cleaning?  
I decided to add steam to this first step.  
I have tons of steam smelling like plastic coming out of the bottom of the water tank (where it has a sticker “caution hot steam”)  
Is that normal?  
When the 15 minutes was done (with the rear heating element), I opened the door, other than hot air, there was no steam coming out.

Any idea what I did wrong?

I’m afraid to run the second step to use top and bottom for 15 minutes at 356f.

---

<div class="post-metadata">

### Author: ![JoeInOttawa](https://avatars.discourse-cdn.com/v4/letter/j/47e85d/32.png) [@JoeInOttawa](https://community.anovaculinary.com/u/JoeInOttawa)
#### Post date: [September 28, 2022, 12:19pm UTC](https://community.anovaculinary.com/t/steam-from-the-bottom-of-the-water-tank-instead-of-the-oven/31140/2 "2022-09-28T12:19:14Z")

</div>

If you have steam set to 100% you should have a lot of steam coming out, depending on your local relative humidity. Make sure your tank is fully-seated into the water inlet at the back of the tank tray.

I also had the plastic smell for the first several minutes of my first run. I attributed that to new parts gassing out.

---

<div class="post-metadata">

### Author: ![FlyingPig](https://avatars.discourse-cdn.com/v4/letter/f/ed8c4c/32.png) [@FlyingPig](https://community.anovaculinary.com/u/FlyingPig)
#### Post date: [September 28, 2022, 7:20pm UTC](https://community.anovaculinary.com/t/steam-from-the-bottom-of-the-water-tank-instead-of-the-oven/31140/3 "2022-09-28T19:20:12Z")

</div>

Got it, thanks…I ran the prep twice and still get the odd smell. But it’s good to know that others are getting the same.  
I have also reseated the tank. I’ll see if that makes a difference.

---

<div class="post-metadata">

### Author: ![ira](https://sea2.discourse-cdn.com/flex016/user_avatar/community.anovaculinary.com/ira/32/8023_2.png) [@ira](https://community.anovaculinary.com/u/ira)
#### Post date: [December 12, 2022, 8:40pm UTC](https://community.anovaculinary.com/t/steam-from-the-bottom-of-the-water-tank-instead-of-the-oven/31140/4 "2022-12-12T20:40:49Z")

</div>

I just got my oven 4 days ago and I also notice that steam pours out of the lower right corner below the water tank. So much that it filled up the drain pan and condensed on the water tank and oven door causing the counter and cabinet to get wet. Is this normal?

---

<div class="post-metadata">

### Author: ![ira](https://sea2.discourse-cdn.com/flex016/user_avatar/community.anovaculinary.com/ira/32/8023_2.png) [@ira](https://community.anovaculinary.com/u/ira)
#### Post date: [February 6, 2023, 5:41am UTC](https://community.anovaculinary.com/t/steam-from-the-bottom-of-the-water-tank-instead-of-the-oven/31140/5 "2023-02-06T05:41:00Z")

</div>

Well, apparently it’s not normal as they replaced the oven as soon as I told them what was happening. I’ve not tried the new one yet, it’s only been here a couple of days.
