# Temperature

**URL:** <https://community.anovaculinary.com/t/temperature/32065>\
**Category:** Anova Precision® Cooker\
**Created:** [June 13, 2023, 12:34am UTC](https://community.anovaculinary.com/t/temperature/32065 "2023-06-13T00:34:55Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![kimmckechnie](https://avatars.discourse-cdn.com/v4/letter/k/82dd89/32.png) [@kimmckechnie](https://community.anovaculinary.com/u/kimmckechnie)\
**Post date:** [June 13, 2023, 12:34am UTC](https://community.anovaculinary.com/t/temperature/32065/1 "2023-06-13T00:34:55Z")

</div>

I just received my Anova Pro about two weeks ago. My first try last week it stopped three times with a beep before it reached temperature - I had to keep restarting it. Was doing Corn 190F - worked fine for Steaks at 134F

Today is my second attempt. First item - lamb chops 134F - worked fine. Then potatoes at 190F - machine stopped at 176F and I had to restart - did this 3x. Then when it got to 190 - it just kept going. Beeping and shutting down and then going above 190F again several times.

What am I doing wrong?

---

<div class="post-metadata">

**Author:** ![FurrierTransform](https://avatars.discourse-cdn.com/v4/letter/f/839c29/32.png) [@FurrierTransform](https://community.anovaculinary.com/u/FurrierTransform)\
**Post date:** [June 13, 2023, 10:31pm UTC](https://community.anovaculinary.com/t/temperature/32065/2 "2023-06-13T22:31:31Z")

</div>

I’d say that if your unit was an old one, steam from a high temperature water bath can get into the electronic boards and cause misbehavior, but Anova now coats their PC boards to prevent that.

---

<div class="post-metadata">

**Author:** ![kimmckechnie](https://avatars.discourse-cdn.com/v4/letter/k/82dd89/32.png) [@kimmckechnie](https://community.anovaculinary.com/u/kimmckechnie)\
**Post date:** [June 13, 2023, 10:51pm UTC](https://community.anovaculinary.com/t/temperature/32065/3 "2023-06-13T22:51:39Z")

</div>

Hi

As I mentioned in my post, the Anova Pro is brand new. Has only been used twice.

Not sure what I should do?

![~WRD0003.jpg](https://us1.discourse-cdn.com/flex016/uploads/anova/original/2X/5/52d5f1c08649212fe6768d2cacdcf8df711810d9.jpeg)

---

<div class="post-metadata">

**Author:** ![Ragnhild](https://avatars.discourse-cdn.com/v4/letter/r/958977/32.png) [@Ragnhild](https://community.anovaculinary.com/u/Ragnhild)\
**Post date:** [June 14, 2023, 2:28am UTC](https://community.anovaculinary.com/t/temperature/32065/4 "2023-06-14T02:28:05Z")

</div>

Contact cs for replacement. Sorry to say but it seems Anova continues with less than stellar qc.