# Tripping Ground Fault Circuit Interrupter

**URL:** <https://community.anovaculinary.com/t/tripping-ground-fault-circuit-interrupter/5089>\
**Category:** Anova Support\
**Created:** [February 20, 2017, 11:56pm UTC](https://community.anovaculinary.com/t/tripping-ground-fault-circuit-interrupter/5089 "2017-02-20T23:56:00Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![tw69](https://avatars.discourse-cdn.com/v4/letter/t/5f8ce5/32.png) [@tw69](https://community.anovaculinary.com/u/tw69)\
**Post date:** [February 20, 2017, 11:56pm UTC](https://community.anovaculinary.com/t/tripping-ground-fault-circuit-interrupter/5089/1 "2017-02-20T23:56:00Z")

</div>

So I cooked some spare ribs last week with no issues. Today I went to cook some pork chops. I set the temp as always and everything was fine. Hit the start button and GFCI tripped. Tried several times with same result. Moved to a room with a different GFCI, same results. Unit is about 3 years old. Any suggestions?

---

<div class="post-metadata">

**Author:** ![Liz11](https://avatars.discourse-cdn.com/v4/letter/l/7c8e57/32.png) [@Liz11](https://community.anovaculinary.com/u/Liz11)\
**Post date:** [February 21, 2017, 8:05pm UTC](https://community.anovaculinary.com/t/tripping-ground-fault-circuit-interrupter/5089/2 "2017-02-21T20:05:30Z")

</div>

Have you contacted support? [support@anovaculinary.com](mailto:support@anovaculinary.com) I know that is likely not the answer you are looking for but they know the devices really well and if there is a fix, they’ll help you out.