# Vacuum hose for Anova Vacuum Chamber

**URL:** <https://community.anovaculinary.com/t/vacuum-hose-for-anova-vacuum-chamber/31124>\
**Category:** Accessories\
**Created:** [September 22, 2022, 12:08am UTC](https://community.anovaculinary.com/t/vacuum-hose-for-anova-vacuum-chamber/31124 "2022-09-22T00:08:15Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Colonel](https://sea2.discourse-cdn.com/flex016/user_avatar/community.anovaculinary.com/colonel/32/7738_2.png) [@Colonel](https://community.anovaculinary.com/u/Colonel)\
**Post date:** [September 22, 2022, 12:08am UTC](https://community.anovaculinary.com/t/vacuum-hose-for-anova-vacuum-chamber/31124/1 "2022-09-22T00:08:15Z")

</div>

I understand that a vacuum hose can be used with the Anova vacuum chamber sealer. I tried using a standard Food-Saver hose to seal a large jar outside the chamber. The Food-Saver hose, however, is apparently the wrong size and will not stay in the suction inlet inside the chamber. Will ANOVA be providing a vacuum hose to be used in the chamber? If not, is there one that can be purchased from another source?

---

<div class="post-metadata">

**Author:** ![Douglas](https://sea2.discourse-cdn.com/flex016/user_avatar/community.anovaculinary.com/douglas/32/7533_2.png) [@Douglas](https://community.anovaculinary.com/u/Douglas)\
**Post date:** [September 22, 2022, 11:10am UTC](https://community.anovaculinary.com/t/vacuum-hose-for-anova-vacuum-chamber/31124/2 "2022-09-22T11:10:53Z")

</div>

Thank you for your service @Colonel (USN SS ‘69 - ‘75)

I too have struggled with incompatible vacuum fitting standards. For now I have an ANOVA tube with fittings cut and joined to a Foodsaver tube with fittings and cut. One hose fits tightly inside the other, still not a satisfactory solution.

I would like a set of borosilicate glass storage dishes with vacuum port lids that are compatible with ANOVA’s vacuum fittings. I do not want to buy another flimsy / expensive vacuum pump.