# Wall mount for Precision Cooker

**URL:** <https://community.anovaculinary.com/t/wall-mount-for-precision-cooker/4528>\
**Category:** General\
**Created:** [January 21, 2017, 3:57am UTC](https://community.anovaculinary.com/t/wall-mount-for-precision-cooker/4528 "2017-01-21T03:57:53Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![cmitchel](https://avatars.discourse-cdn.com/v4/letter/c/e19b73/32.png) [@cmitchel](https://community.anovaculinary.com/u/cmitchel)\
**Post date:** [January 21, 2017, 3:57am UTC](https://community.anovaculinary.com/t/wall-mount-for-precision-cooker/4528/1 "2017-01-21T03:57:53Z")

</div>

Made a simple wall mount for storing my precision cooker out of the way when not in use. Didn’t have any cabinet or shelving space available, so I made this metal bracket that replaced a telephone outlet cover which wasn’t being used. Simple design yet effective, I love it!

 ![](https://us1.discourse-cdn.com/flex016/uploads/anova/original/1X/3e40a6d57fcd140baf555732610268cfdf6ee119.jpg)

---

<div class="post-metadata">

**Author:** ![cmitchel](https://avatars.discourse-cdn.com/v4/letter/c/e19b73/32.png) [@cmitchel](https://community.anovaculinary.com/u/cmitchel)\
**Post date:** [January 21, 2017, 3:58am UTC](https://community.anovaculinary.com/t/wall-mount-for-precision-cooker/4528/2 "2017-01-21T03:58:37Z")

</div>

![](https://us1.discourse-cdn.com/flex016/uploads/anova/original/1X/f20d3b6fe798c086cad3631ded0d55aca41195d0.jpg)

---

<div class="post-metadata">

**Author:** ![acs](https://sea2.discourse-cdn.com/flex016/user_avatar/community.anovaculinary.com/acs/32/855_2.png) [@acs](https://community.anovaculinary.com/u/acs)\
**Post date:** [January 21, 2017, 4:35pm UTC](https://community.anovaculinary.com/t/wall-mount-for-precision-cooker/4528/3 "2017-01-21T16:35:58Z")

</div>

Neat. Nice metalworking too.

Stainless?

---

<div class="post-metadata">

**Author:** ![cmitchel](https://avatars.discourse-cdn.com/v4/letter/c/e19b73/32.png) [@cmitchel](https://community.anovaculinary.com/u/cmitchel)\
**Post date:** [January 21, 2017, 10:51pm UTC](https://community.anovaculinary.com/t/wall-mount-for-precision-cooker/4528/4 "2017-01-21T22:51:39Z")

</div>

It was a scrap piece of 12ga galvaneal I cut and bent in the shop. Still have to finish cleaning it up then paint it.

---

<div class="post-metadata">

**Author:** ![HunterC](https://sea2.discourse-cdn.com/flex016/user_avatar/community.anovaculinary.com/hunterc/32/878_2.png) [@HunterC](https://community.anovaculinary.com/u/HunterC)\
**Post date:** [January 24, 2017, 4:50pm UTC](https://community.anovaculinary.com/t/wall-mount-for-precision-cooker/4528/5 "2017-01-24T16:50:31Z")

</div>

This is really cool! Nice work, I am going to share this with the office 😉