# What is happening with my precision cooker? **URL:** \ **Category:** Anova Support\ **Created:** [June 13, 2024, 8:41am UTC](https://community.anovaculinary.com/t/what-is-happening-with-my-precision-cooker/33114 "2024-06-13T08:41:02Z")\ **Posts on this page:** 1\ **Showing post:** 5
**Author:** ![MrGus](https://avatars.discourse-cdn.com/v4/letter/m/b9bd4f/32.png) [@MrGus](https://community.anovaculinary.com/u/MrGus)\ **Post date:** [June 14, 2024, 2:27pm UTC](https://community.anovaculinary.com/t/what-is-happening-with-my-precision-cooker/33114/5 "2024-06-14T14:27:00Z")
THIS THREAD might provide info if it cannot be reset… > [@Current temp stuck at 32 degrees](https://community.anovaculinary.com/t/current-temp-stuck-at-32-degrees/5021/12): > > I’ll try to go into as much detail as I can and explain what I did and why. If there are any questions, don’t hesitate slight_smile First, I tried to guess what’s wrong from what I can see without opening the device. I know the controller works since it turns on, has a working display and the buttons also work. I know the motor and heater are working, this means that the power supply section is also fine. The biggest clue was the temperature itself. while 32F seems arbitrary, 0C can’t be a… --- _[View the full topic](https://community.anovaculinary.com/t/what-is-happening-with-my-precision-cooker/33114)._